Design Files¶
Design file name |
File type |
Open source license |
Location |
|---|---|---|---|
skimmer_clamp_M3 |
STL & CAD (F3Z; STEP) |
CERN-OHL-W |
|
skimmer_height_block_<height>mm.stl |
STL |
CERN-OHL-W |
|
perfusion_lid_drill_jig |
STL & CAD (STEP) |
CERN-OHL-W |
|
petri_drill_jig_<size>_<inlet/outlet> |
STL & CAD (STEP) |
CERN-OHL-W |
|
valve_clip_base |
STL & CAD (STEP) |
CERN-OHL-W |
|
fetbox_complete |
CAD (F3D, STEP) |
CERN-OHL-W |
|
fetbox_enclosure_base |
STL |
CERN-OHL-W |
|
fetbox_enclosure_lid |
STL |
CERN-OHL-W |
|
FETbox_rev0_Gerber_JLCPCB |
Gerber CAM (ZIP’ed folder) |
CERN-OHL-W |
|
FETbox_rev0_PCB |
EAGLE design files (SCH + BRD) |
CERN-OHL-W |
|
Firmware_FETbox.ino |
Firmware (INO) |
CERN-OHL-W |
|
plateflo |
Python package |
GNU-GPL3+ |
- skimmer_clamp_M3
Print-in-place skimmer nozzle clamping mechanism. Fixed atop a drilled Nunc OmniTray lid to allow precise positioning of the skimmer nozzle tip height. CAD files include modelled M3 fastener hardware as assembled.
- perfusion_lid_drill_jig
A guide for marking hole locations on Nunc® OmniTray® lids for drilling. Slides over top of the lid with holes for a fine-tipped marker.
- petri_drill_jig_<size>_<inlet/outlet>
As above, but for alternative petri dish culture chambers. Two pieces, inlet and outlet sides, that slide together to accommodate variability in petri dish dimension between manufacturers.
- valve_clip_base
Simple stand for the BOM pinch valve clip. Holds the valve horizontal for use on e.g. an incubator shelf.
- skimmer_height_block_<##>mm
Blocks of defined heights, <##>: 1.2, 1.4,1.6, and 1.8 mm. Placed under the skimmer nozzle before tightening the skimmer clamp for repeatable height setting.
- fetbox_complete
CAD model of the FETbox hardware controller with PCB and key electronic components modelled as assembled.
- fetbox_enclosure_base
Bottom half of the FETbox enclosure, into the which the PCB, power inlet, and MOSFET output jacks are mounted.
- fetbox_enclosure_lid
the top cover of the FETbox enclosure. Has ventilation for the output MOSFETs and Arduino. It snap-fits onto the fetbox_enclosure_base.
- FETbox_rev0_Gerber_JLCPCB
Compressed (.zip) manufacturing Gerber (CAM)files. Ready for upload to the JLCPCB website for PCB ordering.
- FETbox_rev0_PCB
Autodesk EAGLE PCB source files for the FETbox_rev0_PCB. SCH and BRD files are co-dependant and must be downloaded together in order to open/modify the design.
- Firmware_FETbox
Arduino “sketch”/firmware for the Arduino Nano developmentboard used in the FETbox hardware controller. Opened with Arduino IDE software
- plateflo
A Python package containing modules to simplify coding serial control of the FETbox and Ismatec Reglo peristaltic pumps.
See FETbox Serial Control, Perfusion Event Scheduler, and more generally PlateFlo API Index for more tutorials and usage usage.