Bill of Materials (BOM)¶
BOM Tables¶
Component |
Number |
Cost per unit (EUR) |
Total cost (EUR) |
Source of materials |
Material |
---|---|---|---|---|---|
Hardware Controller PCB |
1 |
3.8 |
3.8 |
FR4 |
|
Arduino Nano, rev3 (A000005) - development board |
1 |
19.18 |
19.18 |
||
Single-row female header, 36-pin, 2.54mm pitch |
2 |
1.1 |
2.2 |
||
CL13845G - 3.5mm jack, mono, female, w/nut |
5 |
2.61 |
13.04 |
||
3.5mm jack, mono, male |
5 |
2.77 |
13.85 |
||
5.5x2.1mm DC barrel jack, panel mount |
1 |
1.16 |
1.16 |
||
12V DC power supply, 5A (60W) |
1 |
29.99 |
29.99 |
||
FQP30N06L - N-channel MOSFET, TO220 package |
5 |
0.82 |
4.1 |
||
1N4004 - rectifier diode, axial package |
5 |
0.14 |
0.7 |
||
10kOhm resistor, 1/4W, axial package |
5 |
0.13 |
0.65 |
||
100uF electrolytic capacitor, 35V, 2.5mm leg pitch, radial package |
1 |
0.08 |
0.08 |
||
Screw, M3x8mm, DIN912 |
10 |
0.03 |
3.49 [1] |
Stainless steel |
Component |
Number |
Cost per unit (EUR) |
Total cost (EUR) |
Source of materials |
Material |
---|---|---|---|---|---|
Screw, M3x8mm, DIN912 |
10 |
0.03 |
3.49 [1] |
Stainless steel |
|
Hex nut, M3, DIN934 |
1 |
0.04 |
3.58 [1] |
Stainless steel |
|
Nunc OmniTray, one-well treated plates w/lids - 60/case |
1 |
4.82 |
289.00 |
PS |
|
P200 pipette tips, non-filtered |
4 |
Any |
|||
PCB milling set, 2-3 mm |
1 |
9.31 |
9.31 |
Component |
Number |
Cost per unit (EUR) |
Total cost (EUR) |
Source of materials |
Material |
---|---|---|---|---|---|
Bio-Chem Valve 100P Pinch Valve, 12V, 3-way, 1/8”; 100PD3MP12-02B |
1 |
160.71 |
160.71 |
||
Spring steel mounting clip for 100P pinch valves; MC-100 |
1 |
2.91 |
2.52 |
||
Ismatec Reglo ICC, 4 independent-channel, 8-roller peristaltic pump [2] |
2 |
2234.83 |
4469.66 |
||
USB-A to USB-Mini-B cable |
3 [3] |
1.84 |
5.52 |
||
PharMed BPT Tubing, 1.52mm ID, 3.22mm OD - 100ft |
1 |
176.72 |
176.72 |
Ismaprene |
|
ParMed BPT 3-stop tubing, 1.52mm ID (yellow/blue) - 12/pk |
1 |
98.56 |
98.56 |
Ismaprene |
|
Assorted 1/16” fittings |
Cole-Parmer |
PTFE or PVDF |
BOM Notes
Required Tools¶
FDM 3D printer
Small drill press, hand drill, or rotary tool (e.g. Dremel)
Cyanoacrylate (super) glue
Soldering iron
Flux-core solder
Side cutters or similar (e.g. Knipex 78 61 125)
2.5 mm hex wrench
Optional Tools/Components¶
Isopropanol – for cleaning residual flux from PCB
Heat-shrink tubing – for DC input jack wire joint protection
Self-adhesive silicone feet - for hardware controller and valve stand